One of the more time-consuming parts of assembling any build is the process of installing your CPU cooler. Unless you’re using an included box cooler , you’ll need to first add the appropriate mounting bracket to your motherboard, then install the cooler itself. We’re using a large 240mm AIO cooler, which has a big radiator with two 120mm fans. Lower tier builds, particularly if you’re not going to overclock, can get by with far less cooling.

Your case cables make it so you can use the various ports on the front of your PC in addition to the power button itself. Of course, nothing is going to happen when you press that button if you don’t plug your PSU into your motherboard.

Part List For $600 Pc Build

At this point, all you need to do is line up the graphics card with the PCIe Express slot and then push down until the plastic notch flips up and clicks. Again, you don’t need a lot of force to push it in, but you will need to push the graphics card into its slot until you get that click.

• The overall design makes this keyboard unique on its own and it is also probably the reason why this keyboard is in its own league.
• This allows you to replace the keycap to your preference or to any other keycaps that are customized to fit any Cherry Mx or Kailh keyboards.
• Looking closer at the keycaps, it uses a “+” socket design.
• You just have to remove the back cover of the keyboard and unsolder the switches.
• Offering you a nonstandard keyboard layout that fits any theme or setup and unique in its own way.

We connected an appropriate cable with two 6/8-pin PEG connectors above, so just route those through an opening close to the graphics card and then plug them in. With your graphics card fully powered, you’re ready to game.

Intel Budget Build

Feed these cables through the PSU hole at the bottom of the case as you slide the power supply into place, and then use the thumbscrews to hold it in. Finally, it’s time to discuss the component you’re probably the most excited about. First, you’ll need to remove an appropriate number of expansion slot inserts from the back of your case to fit your graphics card.

Once you hear that, you can screw your graphics card’s mounting brackets into the case using the expansion slot’s screws and holes. Before we move on to the last step of physically building your PC, you may want to do some cable management to clean up. This’ll create some room for air circulation and accessing your components if you ever want to upgrade later. Most cases come with Velcro straps or zip ties, but I always keep a bag of Velcros on hand just in case. The case we went with, Fractal’s Meshify C, includes an awesome area for cable management that’s equipped with a series of Velcro straps. We were able to slide all of our cables into this space and keep it all fastened up nicely.

This will vary depending on which GPU you go with, but two is usually the safe number–our MSI GeForce RTX 2080 Ti takes up two. Once you unscrew and remove them, figure out which PCIe Express slot you’ll need to insert your card into, then flip its plastic notch at the far end of the slot downward to prepare handbrake.down4you.software/ for installation.